Ajout d’une VM Hyper-V dans la sauvegarde Veeam

Aujourd’hui, un tutorial trés simple concernant la sauvegarde de veeam.

Introduction

Ce document a pour but d’expliquer brièvement l’intégration d’un nouvel hyperviseur ou d’une nouvelle VM dans Veeam.

Intégration d’un hyperviseur

Avant tout, il faut penser à ouvrir les ports de Veeam sur l’hyperviseur. Le KB suivant vous permettra de savoir quels ports ouvrir :

http://www.veeam.com/kb1518

Après avoir accompli cette tâche, on se rend sur le serveur Veeam, en l’occurrence ici notre serveur de backup et on lance le logiciel Veeam Backup et réplication.

image

Nous arrivons sur l’image ci-joint.

Dans notre cas, on fait un clic droit sur Microsoft Hyper-V et on sélectionne Add Server

image

On peut choisir de rajouter son serveur soit par IP soit par FQDN. On met donc l’ip de notre serveur.  On clique sur Suivant.

Dans le cas d’une intégration d’un serveur seul, on sélectionne Hyper-V Standalone et on clique sur Suivant.

image

On sélectionne l’utilisateur et l’hyper viseur se rajoute.

Sauvegarde d’une machine virtuelle

On va dans Microsoft Hyper-V et on clique sur l’host ou se trouve la VM.

image

On clique droit sur la VM qu’on souhaite sauvegarder et on l’ajoute dans le backup de réplication qu’on souhaite. Dans le cas échéant, on le crée. Rien de compliqué.

 

Pour info, ci-joint les ports à ouvrir (desfois que le kb soit injoignable):

 

eeam backup server

vCenter Server

HTTPS

443

Default VMware web  port that can be customized in vCenter settings

ESX(i) server

HTTPS

443

Default VMware web  port that can be customized in ESX host settings. Not required if vCenter connection is used.

TCP

902

VMware data mover port.

TCP

22

Default SSH port used as a control channel, only for jobs with a full ESX target with the  console agent enabled.

Linux server

TCP

22

Port used as a control channel from the console to the target Linux host.

Windows server

TCP
UDP

135, 137 to 139, 445

Ports required for deploying Veeam Backup & Replication components.

TCP

6160

Default port used by the Veeam Installer Service.

TCP

6162

Default port used by the Veeam Backup Proxy Service.

TCP

6161

Default port used by the Veeam vPower NFS Service.

TCP
UDP

111, 2049+, 1058+

Standard NFS ports.
Note: If ports 2049 and 1058 are occupied, the succeeding port numbers will be used).

TCP

1025 to 5000
(for Microsoft Windows 2003)

49152-65535
(for Microsoft Windows 2008 and newer)

Dynamic RPC port range. For more information, see http://support.microsoft.com/kb/929851/en-us.

Proxy appliance (multi-OS file-level recovery)

SSH

22

Port used as a communication channel from the console to the proxy appliance in the multi-OS file-level recovery process.

Linux server

Veeam backup server

TCP

2500 to 5000

Default range of ports used as transmission channels for jobs writing to Linux target. For every TCP connection that a job uses, one port from this range is assigned.

Windows server

Veeam backup server

TCP

2500 to 5000

Default range of ports used as transmission channels for jobs writing to Windows target. For every TCP connection that a job uses, one port from this range is assigned.

Backup Proxy Connections

The following table describes network ports that must be opened to ensure proper communication of backup proxies with other infrastructure components.

From

To

Protocol

Port

Notes

Communication with VMware Servers

VMware Backup Proxy

vCenter Server

HTTPS

443

Default VMware web service port that can be customized in vCenter settings.

ESX(i) server

TCP

902

VMware data mover port.

HTTPS

443

Default VMware web service port that can be customized in ESX host settings. Not required if vCenter connection is used.

Communication with Backup Repositories

VMware Backup Proxy

Linux server

TCP

22

Port used as a control channel from the backup proxy to the target Linux host.

Windows server

TCP

22

Port used as a control channel from the backup proxy to the target Windows host.

Shared folder CIFS (SMB) share

TCP
UDP

135, 137 to 139, 445

Ports used as a transmission channel from the backup proxy to the target CIFS (SMB) share.

Proxying Windows server

TCP
UDP

135, 137 to 139, 445

If a CIFS (SMB) share is used as a backup repository and a Windows server is selected as a proxying server for this CIFS share, these ports must be opened on the proxying Windows server.

Communication with Backup Proxies

VMware Backup Proxy

VMware Backup Proxy

TCP

2500 to 5000

Default range of ports used as transmission channels for replication jobs. For every TCP connection that a job uses, one port from this range is assigned.

Backup Repository Connections

From

To

Protocol

Port

Notes

VMware Backup Proxy

Linux Server performing the role of the backup repository

TCP

2500 to 5000

Default range of ports used as transmission channels for replication jobs. For every TCP connection that a job uses, one port from this range is assigned.

Windows Server performing the role of the backup repository

Source backup repository

Target backup repository

TCP

2500 to 5000

Default range of ports used as transmission channels for backup copy jobs. For every TCP connection that a job uses, one port from this range is assigned.
Ports 2500 to 5000 are used for backup copy jobs that do not utilize WAN accelerators. If the backup copy job utilizes WAN accelerators, make sure that ports specific for WAN accelerators are open.

WAN Accelerator Connections

The following table describes network ports that must be opened to ensure proper communication between WAN accelerators used in backup copy jobs.

From

To

Protocol

Port

Notes

Communication with Veeam backup server

Veeam backup server

WAN accelerator
(source and target)

TCP

6160

Default port used by the Veeam Installer Service.

TCP

6164

Controlling port for RPC calls.

Communication with Backup Repositories

WAN Accelerator
(source and target)

Backup repository
(source and target)

TCP

2500 to 5000

Default range of ports used by data transport services for transferring files of a small size such as  .nvram, .vmx, .vmxf, GuestIndexData.zip and others. A port from the range is selected dynamically.

Communication Between WAN Accelerators

WAN accelerator

WAN accelerator

TCP

6164

Controlling port for RPC calls.

TCP

6165

Default port used for data transfer between WAN accelerators. Ensure this port is open in firewall between sites where WAN accelerators are deployed.

VM Guest OS Connections

The following table describes network ports that must be opened to ensure proper communication of the Veeam backup server with the runtime coordination process deployed inside the VM guest OS for application-aware image processing and indexing.

From

To

Protocol

Port

Notes

Veeam backup server

Runtime coordination process inside the VM guest OS

TCP

1025 to 5000
(for Microsoft Windows 2003)

49152-65535
(for Microsoft Windows 2008 and newer)

Dynamic RPC port range used by the runtime coordination process deployed inside the VM guest OS for application-aware image processing (when working over the network, not over VIX API).* For more information, see http://support.microsoft.com/kb/929851/en-us.

 

TCP,
UDP

135, 137-139, 445

Ports required for application-aware image processing.

* If you use default Windows firewall settings, you do not need to configure dynamic RPC ports: during setup, Veeam Backup & Replication automatically creates a firewall rule for the runtime process. If you use firewall settings other than default ones or application-aware image processing fails with the “RPC function call failed” error, you need to configure dynamic RPC ports.

Veeam Backup Enterprise Manager Connections

The following table describes network ports that must be opened to ensure proper communication of Veeam Backup Enterprise Manager with other components.

From

To

Protocol

Port

Notes

Veeam Backup Enterprise Manager

Veeam Backup Server

TCP

9392

Default port used by Veeam Backup Enterprise Manager for collecting data from Veeam backup servers. Can be customized during Veeam Backup & Replication installation.

9393

Default port used by the Veeam Backup Catalog Service for catalog replication. Can be customized during Veeam Backup & Replication installation.

2500 to 2600

Ports used by the Veeam Backup Catalog Service for replicating catalog data.

Microsoft
Search Server

TCP

9395

Default port used by the Veeam Backup Search service integration component. Can be customized during Veeam Backup Search installation.

IIS extension

Veeam Backup Enterprise Manager

TCP

9393

Default port used to enable file search. Can be customized during Veeam Backup Enterprise Manager installation.

9394

Default port used by IIS extension to communicate with Veeam Backup Enterprise Manager. Can be customized during Veeam Backup Enterprise Manager installation.

Browser

IIS extension

HTTP

9080

Default ports used to communicate with the website. Can be customized during Veeam Backup Enterprise Manager installation.

HTTPS

9443

Enterprise Manager Web API Client

Enterprise Manager Web API

HTTP

9399

Default HTTP and HTTPS ports used to communicate with Veeam Backup Enterprise Manager Web API. Can be customized during  Veeam Backup Enterprise Manager installation.

HTTPS

9398

Veeam U-AIR Wizards Connections

The following table describes network ports that must be opened to ensure proper communication of U-AIR wizards with other components.

From

To

Protocol

Port

Notes

U-AIR Wizards

Veeam Backup Enterprise Manager

TCP

9394

Default port used for communication with Veeam Backup Enterprise Manager. Can be customized during Veeam Backup Enterprise Manager installation.

Local
inter-process communication

TCP

9396

Default port used for interaction between the U-AIR wizard and Session Manager running on the machine where the U-AIR wizard is installed.

 

Laisser un commentaire

Votre adresse de messagerie ne sera pas publiée. Les champs obligatoires sont indiqués avec *